WarpDriveProps.com
Hoverhawk Corporation
Or pay by Bank Wire Transfer or MoneyGram World-Wide
******** SALE !! Details below ! ********
Warp Drive Aircraft
Propellers, Parts, Replacement Blades and Accessories
======== Aircraft Propellers ========
Click Here For Warp Drive Airboat and Hovercraft Propeller Page
*****
Call +251-609-0969 *****
Warp Drive Propeller 2-Blade Standard Prop |
Warp Drive propeller 2-Blade HPL Prop |
Warp Drive Propeller 3-Blade Standard Prop |
"We ship to every location around the globe where allowed by law"
Call 251-609-0969 for a Warp Drive Aircraft propeller suggestion for your application, send a fax to 815-346-5300, click HERE to send us a request for a propeller suggestion and quote, or to place your order. Contact us at WarpDrive(at)nettally.com or click E-MAIL if you have questions.
Click Here For Warp Drive Airboat and Hovercraft Propeller Page
ORDER FORM--WARP DRIVE AIRCRAFT PROPELLER
QUOTE REQUEST FORM--WARP DRIVE AIRCRAFT PROPELLER
EAA Warp Drive Blade Repair Video Shows How to Repair Leading Edge Damage
===================================================
PROPELLER TIP SPEED CALCULATOR
Instructions for Setting Warp Drive Propeller Blade Pitch
===================================================
3-Blade Warp Drive Propeller shown with HPL Hub, Optional Nickel Leading Edges, Painted Tips and Tapered Tips |
Click Here For Warp Drive Airboat and Hovercraft Propeller Page
***SALE*** GET 5% OFF PRICES BELOW ON ALL WARP DRIVE AIRCRAFT PROPELLERS, BLADE OPTIONS AND REPLACEMENT BLADES ORDERED THROUGH MAY - ORDER NOW!!
SUGGESTION: If you earn your living with your WARP DRIVE Propeller, as MANY do, it would be PRUDENT to have a SPARE prop and/or blades on-hand in case your prop is damaged. Due to the high demand for Warp Drive propellers world-wide, it takes 1 to 2 weeks typically to ship a complete prop or replacement blade(s) when ordered !! If you will need a WARP DRIVE Propeller in the near future, ORDER EARLY !! |
EAA Warp Drive Propeller Blade Repair Video Shows How to Repair Leading Edge damage
WARP DRIVE AIRCRAFT PROPELLER PRICES |
| NOTE: Warp Drive Props are priced by number of blades, not by diameter. Prices include Prop Hub, Blades, Clamping Hardware, Standard Leading Edge Protection (Stoneguard polyurethane tape), Warp Drive Protractor, Instruction Sheets and the Warp Drive Lifetime Guarantee of Satisfaction. Order props in even numbered diameters, such as 72", 70", 68", etc. NOTE: Rotax 912 and 914 engines require the HP-L Hub to accommodate the larger bolt pattern. The standard hub cannot be used for these engines. All direct-drive aircraft-brand engines require the use of the HP hub and HP blades. |
Warp Drive Carbon Fiber
Propellers with Standard Blades |
With Std Hub |
With HP-L Hub |
With HP Hub |
| 2-Blade Std. Carbon Fiber Propeller | $465 |
$610 |
$675 |
| 3-Blade Std. Carbon Fiber Propeller | $675 |
$865 |
$865 |
| 4-Blade Std. Carbon Fiber Propeller (to 74" dia. with OS hub) | $900 |
$1050 (OS) |
|
| 5-Blade Std. Carbon Fiber Propeller | $1070 |
$1250 (OS) |
| Constant Speed Blade Platform * | add $ 60 per blade |
| Nickel Leading Edge Protection | add $ 60 per blade |
| Replacement Std. Carbon Fiber Blade | $190 (Provide prop serial number for exact match) |
| Custom Color | $ 40 per blade |
| White Tips Only | $20 per blade |
Warp Drive Carbon
Fiber Propellers with HP Blades, HP Hubs and OS Hubs |
With HP Hub |
With Oversize |
| 2-Blade Carbon Fiber Propeller up to 72" diameter | $825 |
|
| 3-Blade Carbon Fiber Propeller up to 72" diameter | $1095 |
|
| 4-Blade Carbon Fiber Propeller up to 74" diameter | $1400 |
|
| 5-Blade Carbon Fiber Propeller up to 74" diameter | $1650 |
|
| 6-Blade Carbon Fiber Propeller up to 74" diameter | $1900 |
| Constant Speed Blade Planform * (also known as Tapered Tips) | add $ 60 per blade |
| Nickel Leading Edge Protection | add $ 60 per blade |
| Replacement HP Carbon Fiber Blade | $270 (Provide prop serial number) |
| Add Custom Color | $ 40 per blade |
| Add White Tips Only | $20 per blade |
| Add Rounded Tips -- Used for War Bird look, prop makes a little less noise | $20 per blade |
| * High Aspect Ratio Blade Planform: (Optional) Warp Drive can custom shape the aircraft propeller blade tips to allow a higher pitch setting for optimum cruise speeds. This option is often beneficial to aircraft capable of achieving high cruise speeds. We will determine what we believe to be the best blade platform for the given aircraft, engine horsepower, reduction ratio, prop diameter and airspeed. Warp Drive is able to give you this increase in speed for aircraft without sacrificing the take off and climb performance. This option is shown in the pricing as "Constant Speed Blade Planform." |
EAA Warp Drive Propeller Blade Repair Video Shows How to Repair Leading Edge damage |
FIBERGLASS AND ALUMINUM SPINNERS |
| These polished spun aluminum spinners mount on the hub bolt dimensions, NO MATER WHAT TYPE OR SIZE OF HUB. |
| Polished Aluminum | Fits these Warp Drive props |
|
| 4" Spinner | HPL Hubs using 75mm bolt pattern | $90 |
| 5" Spinner | 2-Bl Std., 3-Bl HPL & 100mm bolt circle HPL | $110 |
| 6-3/4" Spinner | 3-Bl Std., 2-Bl and 3-Bl HP, All SAE 1 & 2 patterns | $160 |
| 7" Spinner | 4-Bl Std., 4-Bl HPOS & 5-Bl HPOS | $170 |
| Fiberglass | Fits these Warp Drive props |
|
| 8" Spinner | 2-Bl HPL & 3-Bl HPL, 100mm or 101.6mm bolt patterns | $175 |
| 9" Spinner | 2-Bl HPL & 3-Bl HPL, 100mm or 101.6mm bolt patterns | $200 |
| 9-1/2" Spinner (Carbon Fiber) NEW | 2-Bl HPL & 3-Bl HPL, 100mm or 101.6mm bolt patterns | $345 |
| 10" Spinner | 2-Bl Std., 3-Bl Std., 2-Bl HP, 3-Bl HP and all HPL | $225 |
| 11-1/2" Spinner | Same as 10" above matches RV Cowlings | $250 |
| 14" Spinner | 3, 4 & 5-Blade HPOS | $300 |
Click Here For Warp Drive Airboat and Hovercraft Propeller Page
Warp Drive Propeller Professional Protractor for setting propeller blade pitch
| Miscellaneous Accessories and Parts | |
| Warp Drive Professional Protractor (free with new prop) | $35 |
| Prop Mounting Hardware (Rotax only) 8mmX75mm | $15 |
| Prop Mounting Hardware (Rotax only) 8mmX90mm | $15 |
| Rotax 912 13mm Press-Fit Drive Lugs, Smooth Bore | $80 |
| Rotax 912 13mm Press-Fit Drive Lugs, Threaded Bore | $95 |
| Drilled Head Prop Mounting Bolts, 75mm for Rotax Engines | $60 |
| Face Plate - All Rotax Prop Bolt Patterns | $85 |
| Face Plate - 4", SAE I, SAE II Patterns | $105 |
| 12" Long Polyurethane Prop Tape Strips--Stone Guard | $3.00 each |
| Prop Blade Repair Per Blade--Typically | $35 to $135 |
| Rotax 912 and 914 Prop Extensions | |
| 1 1/2 " Extension - - Uses longer prop bolts | $335 |
| 2" Extension -- Uses longer prop bolts | $335 |
| 3" Extension -- Uses two sets of short prop bolts | $375 |
| 4" Extension -- Uses two sets of short prop bolts | $375 |
| 6" Extension -- Uses two sets of short prop bolts | $475 |
PROPELLER TIP SPEED CALCULATOR
Instructions
for Setting Warp Drive Propeller Blade Pitch
SUGGESTION: If you earn your living with your WARP DRIVE Propeller, as MANY do, it would be PRUDENT to have a SPARE prop and/or blades on-hand in case your prop is damaged. Due to the high demand for Warp Drive propellers world-wide, it takes 1 to 2 weeks typically to ship a complete prop or replacement blade(s) when ordered !! If you will need a WARP DRIVE Propeller in the near future, ORDER EARLY !! |
Warp Drive Replacement Propeller Hubs and Parts
| Hub Description | Price |
| 3 Blade OS Hub 74"--complete | $310.00 |
| 3 Blade OS--plates only | $245.00 |
| 4 Blade OS Hub 74"--complete | $385.00 |
| 4 Blade OS--plates only | $305.00 |
| 5 Blade OS Hub 74"--complete | $420.00 |
| 5 Blade OS 74"--plates only | $325.00 |
| OS Hub Parts | Price |
| Oversize (OS) 1/2" LXL Spacers | $60.00 set |
| OS Clamping Blocks--per blade | $10.00 |
| OS Clamping Bolts, Nut and Washers--per blade | $8.00 |
| HPL Hubs (2 piece aluminum hub) | Price |
| 2 Blade HPL hub | $255.00 |
| 3 Blade HPL hub | $315.00 |
| Clamping bolts, nuts, washers--per blade | $8.00 |
| HP Hubs (2 piece aluminum hub) | Price |
| 2 Blade HP hub 72" | $315.00 |
| 3 Blade HP hub 72" | $315.00 |
| Standard Hubs | Price |
| 2 Blade Std. hub--complete | $130.00 |
| 2 Blade--plates only | $90.00 |
| 3 Blade Std. hub--complete | $145.00 |
| 3 Blade--plates only | $95.00 |
| 4 Blade Std. hub--complete | $155.00 |
| 4 Blade--plates only | $120.00 |
| Spacer support plate | $12.00 |
| Clamping blocks--per blade | $10.00 |
| Spacers--Std. hub (6 each) | $30.00 set |
| Clamping bolts, nuts, washers--per blade | $8.00 |
Warp Drive Carbon fiber composite aircraft propellers (propellors, props, propelers) and turboprops, turbo props, with variable adjustable blade pitch are light, rigid, durable and efficient make great replacements for Woodcomp, Powerfin, Arplast, Sensenich, Tennessee, Ivo and other props, warpdrive used on aircraft, ultralights, microlights, Light Sport, LSA, gyrocopters, kitplanes kits, experimentals, homebuilts, powered parachutes, paragliders, gyros, autonimous ( autonomous) vehicles, hovercrafts, swamp buggies, bow fishing boats, flounder boats, frog gigging boats, industrial blowers, fans for axial flow for wind machines, pressure or lift, powered by Rotax, Zenoah, Compact Radial, Simonini, Hirth, Kawasaki and other engines
Warp Drive Propeller Torque Values For Aircraft Props
Aircraft Propeller Bolt Torque Values--All Standard, HP and HPL hubs that use 1/4" bolts to clamp the blades in the hub should be tightened to 120 inch pounds. All Rotax bolt patterns that use 8 mm bolts to mount the prop to the gear box flange should be tightened to 175 inch pounds. All Standard, HP and HPL hubs that use 3/8" bolts to clamp the blades or mount the prop should be tightened to 35 foot pounds. Warp Drive propeller installations on direct-drive aircraft engines and other engines used on airboats must tighten the 5/16" clamping bolts to 200 inch pounds and tighten the 1/2" flange mounting bolts to 60 foot pounds. Adherence to these torque values is imperative for reasons of safety. |
ORDER/QUOTE REQUEST FORM--WARP DRIVE PROPELLER
EAA Warp Drive Propeller Blade Repair Video Shows How to Repair Leading Edge damage
2-Blade Warp Drive HP Prop on Corvair Engine Powering a Skycoupe |
3-Blade Warp Drive HPL Prop on Subaru Powered Dominator Gyro |
3-Blade Warp Drive HPL Prop on a Rotax 912 Powered Europa shown with Spinner Removed Revealing Properly Installed Crush Plate |
Click Here For Warp Drive Airboat and Hovercraft Propeller Page
PROPELLER TIP SPEED CALCULATOR
This website is owned and operated by HOVERHAWK CORPORATION which is an authorized worldwide distributor of propellers and parts manufactured by Warp Drive, Inc. HOVERHAWK CORPORATION IS YOUR WORLD-WIDE CONNECTION FOR WARP DRIVE CARBON FIBER COMPOSITE PROPELLERS, REPLACEMENT BLADES AND PARTS
ALL CARBON FIBER CONSTRUCTION: All Warp Drive Propellers are built using an ALL Carbon Fiber matrix: there are no foams, no fiberglass and no gelcoat used in Warp Drive blades.The structural and practical advantages of a Carbon propeller over a fiberglass, wood or metal prop are many, including superior strength, light weight, superior durability and a significantly longer useful life. The construction of Warp Drive's blades allows for simple repair of nicks and gouges that sometimes happen. If you damaged one blade beyond repair (example: ground strike), the blades are individually replaceable. Warp Drive Inc. carries a variety of different propeller hubs to fit almost any bolt pattern. Standard patterns include Rotax, Hirth, Arrow, Subaru, Jabiru, VW, Revmaster, Continental (SAE I), Lycoming (SAE II), etc. Warp Drive Inc. also has a variety of different spinners that mount onto these hubs. Warp Drive Inc. has various sizes of polished aluminum cap spinners and full fiberglass spinners which totally enclose the hubs. See the price list for complete propeller pricing and spinner recommendations and pricing. |
Hoverhawk Corporation is a world-wide distributor for Warp Drive carbon fiber composite aircraft propellers, the new turboprop and offer factory-direct pricing and discounts to our customers. These props are made of a solid carbon fiber matrix (no foam core), have ground adjustable pitch and can be configured with 2 to 12 blades. Buy only a replacement blade if damaged. They may be used on most home-built, experimental and ultralight aircraft, including airboats, hovercraft, industrial blowers, wind machines and wind tunnels. These props are compatible with most engines. Warp Drive manufactures propellers for applications where engine horsepower far exceeds 115 hp unlike some sport propeller manufacturers. Warp Drive, Inc. offers a lifetime guarantee of complete satisfaction to the original purchaser on all of their propellers.
SELLER'S NOTICE AND DISCLAIMER
Prices, specifications, and availability are subject to change without notice. Products and materials advertised on this website are sold with the understanding that the buyer assumes all risks and hazards involved in their use or application. Buyer/User acknowledges assumption of all risks, hazards and further indemnifies seller by purchasing and/or using or reselling the products advertised and sold on this website. No express or implied warranties asserted nor fitness of merchantability claimed by Seller.
Warp Drive Carbon fiber composite aircraft propellers (propellors, props, propelers) and turboprops, turbo props with variable adjustable blade pitch are light, rigid, durable and efficient make great replacements for Woodcomp, Powerfin, Arplast, Sensenich, Tennessee, Ivo and other props, warpdrive used on aircraft, Light Sport, LSA, ultralights, microlights, gyrocopters, kitplanes kits, experimentals, homebuilts, powered parachutes, paragliders, gyros, autonimous ( autonomous) vehicles, hovercrafts, swamp buggies, bow fishing boats, flounder boats, frog gigging boats, industrial blowers, fans for axial flow for wind machines, pressure or lift, powered by Rotax, Zenoah, Compact Radial, Simonini, Hirth, Kawasaki and other engines
