Shipped To You WORLD-WIDE
Warp Drive Airboat Propellers, Parts, Replacement Blades and Accessories
Call 1-251-609-0969 In United States, U.S.Territories & Canada
Call +1-251-609-0969 From Other Countries World-Wide
Email: hoverhawkcorp(at)gmail.com [replace (at) with the @ symbol}
Airboats, Airboats, Airboats !!
Call or email us to request a propeller suggestion, quote or to place your order,
Or use our secure online quote request & order form HERE
Call 1-251-609-0969 in USA
Call +1-251-609-0969 From Outside USA
Our Email Address: hoverhawkcorp (at) gmail.com
WARP DRIVE AIRBOAT AND HOVERCRAFT PROPELLER PRICES WITH HP BLADES
Also available with Sensenich Saber Blades
NOTE: The price includes the Nickel leading edges and a Protractor to measure and set blade pitch. A face plate and propeller mounting bolts are not included
| 3 Blade Propeller | Up to 72" Diameter | $1275 |
| 4 Blade Propeller | Up to 74" Diameter | $1680 |
| 5 Blade Propeller | Up to 74" Diameter | $2025 |
| 5 Blade Propeller | Up to 82" Diameter | $2075 |
| 6 Blade Propeller | Up to 74" Diameter | $2335 |
| 6 Blade Propeller | Up to 82" Diameter | $2395 |
| 7 Blade Propeller | Up to 82" Diameter | $2725 |
| 8 Blade Propeller | Up to 74" Diameter | $2995 |
| 8 Blade Propeller | Up to 82" Diameter | $3065 |
| 10 Blade Propeller | Up to 82" Diameter | $3645 |
| 12 Blade Propeller | Up to 82" Diameter | $4305 |
Warp Drive Airboat Propellers, including the new Airboat TURBO PROP, are more efficient, extremely durable, repairable and individual blades are replaceable if damaged beyond repair. Warp Drive solid carbon fiber airboat propellers with nickel leading edges make excellent, more durable replacements for Water Walker, Wind Walker, Sensenich, Whirlwind, Ivo and other airboat props, including that old, worn-out wood propeller that could fail.
WARP DRIVE AIRBOAT TURBO PROPELLERS
WARP DRIVE AIRBOAT AND HOVERCRAFT TURBO PROPELLER PRICES WITH HP BLADES |
NOTE: The price for the TURBO PROPELLER includes the Nickel leading edges, faceplate and the mounting bolts ! A Protractor to measure and set blade pitch is also included. This model of propeller makes less NOISE and is more efficient in converting Horse Power into thrust over most of the useable propeller RPM range due to the airflow boosting effect caused by setting the rear blades at a higher blade pitch than the front set of blades.The TURBO propeller uses a common center plate or plates allowing stacking of the blade sets to make a single rigid hub assembly. The additional "thickness" of the Turbo prop assembly must be accommodated in the propeller guard when considering this style of propeller! A 2×3 is 5 1/2" thick and a 3×3 is 8" thick, for example. |
| 6 Blade Turbo 3×2 | Up to 74" diameter | $2460 |
| 6 Blade Turbo 3×2 | Up to 82" Diameter | $2520 |
| 8 Blade Turbo 4×2 | Up to 74" Diameter | $3120 |
| 8 Blade Turbo 4×2 | Up to 82" Diameter | $3190 |
| 8 Blade Turbo 4×2 | Up to 86" Diameter | $3190 |
| 9 Blade Turbo 3×3 | Up to 74" Diameter | $3325 |
| 10 Blade Turbo 5×2 | Up to 82" Diameter | $3770 |
| 12 Blade Turbo 6×2 | Up to 82" Diameter | $4430 |
| Warp Drive Propeller Airboat and Hovercraft Replacement Blades (HP & HPOS) are $395.00 per blade which includes the Nickel Edges (Provide propeller serial number) |
|
WARP DRIVE PROPELLER PRICES FOR SMALLER ENGINES WITH STANDARD BLADES |
|
Warp Drive Airboat Propellers with Standard Blades, Nickel leading edges included. (For less than 120 hp with PSRU) |
With Standard Hub (Hub 2 1/2″ thick) |
With HP-L Hub (Hub 2″ thick) |
With HP Hub (Hub 2″ thick) |
| 2-Blade Standard Carbon Fiber Propeller |
$585 |
$730 |
$795 |
| 3-Blade Standard Carbon Fiber Propeller |
$855 |
$1045 |
$1045 |
| 4-Blade Standard Carbon Fiber Propeller (to 74″ diameter with OS hub) |
$1140 |
——- |
$1290 (OS) |
| 5-Blade Standard Carbon Fiber Propeller |
$1370 |
——- |
$1550 (OS) |
| Replacement Standard Carbon Fiber Blade with nickel leading edges | $315 each |
| Add Custom Blade Color (for the custom look) | $40 per blade |
| Add Painted White Tips for safety | $20 per blade |
| Miscellaneous Accessories and Parts | |
| Warp Drive Professional Protractor (free with new propeller) | $45 |
| Face Plate – All Rotax Propeller Bolt Patterns | $65 |
| Face Plate – 4", SAE I, SAE II Patterns | $85 |
| 12" x 1" Urethane Propeller Tape Strips–Stone Guard | $4.00 each |
| Direct-Drive Prop Extensions – To fit Continental, GPU, and Lycoming Engines | |
| 2" Prop Extension | $495 |
| 4" Prop Extension | $525 |
| VW engine propeller adapter/extension pkg. | $1350 |
Use an adapter pictured on the left to convert a Chevy or Cadillac engine to direct drive propeller application. Bolt onto the flywheel-end of the crankshaft. Provides SAE2/LXL bolt pattern for propeller mounting. $379 with crank mounting bolts included, plus shipping. When ordering specify Chevy crank bolt circle diameter or for Cadillac.
Shipped To You WORLD-WIDE
Warp Drive Replacement Airboat Propeller Hubs and Parts
| Hub Description | Price |
| 3 Blade HP Hub–complete | $315.00 |
| 4 Blade OS Hub–complete | $385.00 |
| 4 Blade OS–plates only | $305.00 |
| 5 Blade OS Hub 74"–complete | $420.00 |
| 5 Blade OS 74"–plates only | $325.00 |
| 5 Blade OS Hub 82"–complete | $470.00 |
| 5 Blade OS 82"–plates only | $375.00 |
| 6 Blade OS Hub 74"–complete | $430.00 |
| 6 Blade OS 74"–plates only | $335.00 |
| 6 Blade OS Hub 82"–complete | $490.00 |
| 6 Blade OS 82"–plates only | $380.00 |
| 7 Blade OS Hub 82"–complete | $500.00 |
| 7 Blade OS 82"–plates only | $395.00 |
| 8 Blade OS Hub 74"–complete | $445.00 |
| 8 Blade OS 74"–plates only | $335.00 |
| 8 Blade OS Hub 82"–complete | $510.00 |
| 8 Blade OS 82"–plates only | $405.00 |
| 10 Blade OS Hub 82"–complete | $520.00 |
| 10 Blade OS 82"–plates only | $405.00 |
| 12 Blade OS Hub 82"–complete | $535.00 |
| 12 Blade OS 82"–plates only | $405.00 |
| OS Hub Parts | Price |
| Oversize (OS) 1/2" LXL Spacers | $60.00 set |
| OS Clamping Blocks–per blade | $10.00 |
| OS Clamping Bolts, Nut and Washers–per blade | $8.00 |
| HPL Hubs (2 piece aluminum hub) | Price |
| 2 Blade HPL hub | $255.00 |
| 3 Blade HPL hub | $315.00 |
| Clamping bolts, nuts, washers–per blade | $8.00 |
| HP Hubs (2 piece aluminum hub) | Price |
| 2 Blade HP hub | $315.00 |
| 3 Blade HP hub | $315.00 |
| Standard Hubs | Price |
| 2 Blade Std. hub–complete | $130.00 |
| 2 Blade–plates only | $90.00 |
| 3 Blade Std. hub–complete | $145.00 |
| 3 Blade–plates only | $95.00 |
| 4 Blade Std. hub–complete | $155.00 |
| 4 Blade–plates only | $120.00 |
| Spacer support plate | $12.00 |
| Clamping blocks–per blade | $10.00 |
| Spacers–Std. hub (6 each) | $30.00 set |
| Clamping bolts, nuts, washers–per blade | $8.00 |
Call or email us to request a propeller suggestion, quote or to place your order,
Or use our secure online quote request & order form HERE
Torque Values For Warp Drive Propellers
Warp Drive Propeller Bolt Torque Values–All Standard, HP and HPL hubs that use 1/4″ bolts to clamp the blades in the hub should be tightened to 120 inch pounds. All Rotax bolt patterns that use 8 mm bolts to mount the prop to the gear box flange should be tightened to 175 inch pounds. All Standard, HP and HPL hubs that use 3/8″ bolts to mount the prop should be tightened to 35 foot pounds. Warp Drive propeller installations on direct-drive aviation engines and other engines used on airboats must tighten the 5/16″ clamping bolts to 200 inch pounds and tighten the 1/2″ flange mounting bolts to 60 foot pounds. Adherence to these torque values is imperative for reasons of safety.
Our Alternative Propellers, Fans and Accessories
Hoverhawk Custom-Made, Wood Propellers for Aircraft, Airboats & Hovercraft
These high-quality propellers (2-blade, laminated birch wood props with in-laid urethane leading edges, clear varnished, LH or RH rotation) may be used direct-drive, up to 900 feet per second tip speed, on engines such as VW, Jabiru, Continental, Lycoming, Subaru, UL Power and industrial direct-drive engines or with propeller reduction drives when appropriate. All propeller bolt patterns are available to fit the appropriate propeller.
Blade pitch and blade width to suit the particular application is based on the customer-provided information. Cruise speed, engine hp, maximum propeller rpm and other factors provided by the customer are used, or you may order the specific diameter and pitch you want.
Larger Diameters available up to 85 inches !
THRUST FANS for Hovercraft, Fan Boats, Mini Airboats, Bowfishing, Flounder Boats.....
Specify plain bore, taper-lock or flange mounting when ordering
Belt Reduction Drive System for Small Engines
Click Here for Details
Ultra-Prop & Ultra-Prop II for Airboats and Hovercraft
Click HERE for the Original Ultra-Prop & Ultra-Prop II Propellers- Solid Carbon Fiber Composite !
Can be used on B&S, Honda, Harbor Freight Predator engines & Rotax 912 engines too. Bolt-on and go!
(20″ to 67″ diameters available, 2 to 6-bladed propellers)
On Sale! Inflatable Boats, Dinghies, River Rafts, Pontoons On Sale!
Build using Marine-Grade Plywood and Polyester or Epoxy Resin
Useful Web Links
www.UltraProps.com www.Hoverhawk.com
SELLER’S NOTICE AND DISCLAIMER
Prices, specifications, and availability are subject to change without notice. Products and materials advertised on this website are sold with the understanding that the buyer assumes all risks and hazards involved in their use or application. Buyer/User acknowledges assumption of all risks, hazards and further indemnifies seller by purchasing and/or using or reselling the products advertised and sold on this website. No express or implied warranties asserted nor fitness of merchantability claimed by Seller.
Copyright 2000-2024